Milestone M50 - Manual (Page 165)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 165 Advanced configuration
Note that you can only make selections from the local computer, even if you click the
Locations... button.
2. In the Enter the object names to select box, type the relevant user name(s), then use the
Check Names feature to verify it. If you type several user names, separate each name with a
semicolon. Example: Brian; Hannah; Karen; Wayne.
3. When done, click OK.
4. Specify General Access (on page 167) and Camera Access (on page 167) properties. These
properties will determine the rights of the user.
5. Click OK.
6. Save your configuration changes by clicking Save in the yellow notification bar in the upper-
right corner of the Management Application.
Users added from a local database logging in with a client should not specify any server name, PC
name, or IP address as part of the user name. Example of a correctly specified user name: USER001.
Example of an incorrectly specified user name: PC001/USER001. The user should still specify a
password and any required server information.
Add user groups
User groups are logical groups created and used for practical purposes in the Management
Application only. They are not in any way connected with user groups from central directory services
such as, for example, Active Directory
® .
By grouping users, you can specify rights (see "Configure user and group rights" on page 166) for all
users within a group in one go. If you have many users performing similar tasks, this can save you
significant amounts of work.
Make sure you add groups before you add users: you cannot add existing users to groups.
1. In the Management Application's navigation pane, expand Advanced Configuration, right-
click Users, and select Add New User Group.
2. Specify a name. Names must be unique, and must not contain any of these special characters:
< > & ' " \ / : * ? | [ ]
3. Click OK.
4. Specify General access (on page 167) and Camera access (on page 167) properties. These
properties will determine the rights of the group's future members.
5. Click OK.
6. Save your configuration changes by clicking Save in the yellow notification bar in the upper-
right corner of the Management Application.
7. Now you can add users to the group: in the navigation pane, right-click the group you just
created, and Add basic users (on page 164) or Add Windows users (on page 164) as
required.