Milestone M50 - Manual (Page 124)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 124 Advanced configuration
Name Description
Event priority
The same data package may be analyzed for different events. The
ability to assign a priority to each event lets you manage which
event should be triggered if a received package matches the criteria
for several events. The priority must be specified as a number
between 0 (lowest priority) and 1000 (highest priority). When
Milestone Husky product receives a TCP and/or UDP package,
analysis of the packet will start with analysis for the event with the
highest priority. This way, when a package matches the criteria for
several events, only the event with the highest priority will be
triggered. If a package matches the criteria for several events with
an identical priority, for example two events with a priority of 999, all
events with the priority in question will be triggered.
Event protocol
Select which protocol Milestone Husky product should listen for in
order to detect the event:

Any: Listen for, and analyze, packages using TCP as well
as UDP protocol.

TCP: Listen for, and analyze, packages using TCP protocol
only.

UDP: Listen for, and analyze, packages using UDP protocol
only.
Event rule type
Select how particular Milestone Husky product should be when
analyzing received data packages:

Search: In order for the event to occur, the received
package must contain the message specified in the Event
message expression field, but may also have more content.
Example: If you have specified that the received package
should contain the terms "User001" and "Door053", the
event will be triggered if the received package contains the
terms "User001" and "Door053" and "Sunday" since your
two required terms are contained in the received package.

Match: In order for the event to occur, the received package
must contain exactly the message specified in the Event
message expression field, and nothing else.
Send e-mail if this event
occurs
Only available if e-mail notification (see "Configure email
notifications" on page 144) is enabled. Select if Milestone Husky
product should automatically send an e-mail when the event occurs.
Recipients are defined as part of the e-mail notification
configuration. When using e-mail notifications, also bear in mind
individual cameras' scheduling.
Attach image from camera
Only available if e-mail notification (see "Configure email
notifications" on page 144) is enabled. Select to include an image,
recorded at the time the event is triggered, in the e-mail notification,
then select the relevant camera in the list next to the check box.