Sewing pattern continuously -17, Caution – Brother SuperGalaxie 3000 3000C 3000D 3100D User Manual
Page 160
Sewing Character/Decorative Stitches
4-17
Sewing Pattern Continuously
Press
to select continuous sewing or single stitch
sewing.
Changing Thread Density (Only for Satin Stitch Patterns)
After selecting the pattern, press
to select your pre-
ferred thread density.
CAUTION
If the stitches bunch when thread density is
changed to
, return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
*
Even if you select a new pattern after changing the
thread density, the thread density remains the same until
you change it.
*
You can not change thread density for a combined pat-
tern after the combination is finished.
Note
To finish a complete motif while sewing the pattern con-
tinuously, you can press the
key while sewing. The
machine will automatically stop when the motif is finished.