Brother SuperGalaxie 3000 3000C 3000D 3100D - Manual (Page 65)

2-8 Getting Ready to Sew
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
STITCH SETTINGS
Setting Stitch Width for Zigzag Stitch Patterns
You can change the stitch width of each zigzag stitch. Normally, the machine automatically sets
an appropriate zigzag stitch pattern width when the stitch pattern is selected. Follow the steps
below when you want to change the zigzag stitch pattern width.
Note
It is not possible to change the width of some stitches (see page 2-10 for reference ).
Press to narrow the zigzag stitch pattern width. The
value in the display gets smaller.
Press to widen the zigzag stitch pattern width. The
value in the display gets bigger.
Note
For an alternate method of changing stitch width using
the speed controller (see page 3-34).