Using a frame pattern to make appliqué (1) -59 – Brother SuperGalaxie 3000 3000C 3000D 3100D User Manual
Page 234
Embroidery
5-59
1 Appliqué material
1
Using a Frame Pattern to Make Appliqué (1)
You can use framed patterns of the same size and shape, to create an appliqué. Embroider one
pattern with a straight stitch and one pattern with a satin stitch.
1. Select a straight stitch frame pattern. Embroider the pat-
tern onto the appliqué material, then cut neatly around
the outside of the shape.
2. Embroider the same pattern from step 1 onto the base
fabric.
3. Apply a thin layer of fabric glue or a temporary spray
adhesive to the rear of the appliqué created in step 1.
Attach the appliqué to the base fabric matching the
shapes.
4. Select the satin stitch frame pattern of the same shape
as the appliqué. Embroider over the appliqué and base
fabric from step 3 to create the appliqué.
CAUTION
If you change the size or position of the patterns when
selecting them, make a note of the size and location.