Changing the needle -43, Caution – Brother SuperGalaxie 3000 3000C 3000D 3100D User Manual
Page 54
Setting Up
1-43
1
2
1
2
6
5
5. With the presser foot lever raised, tighten the screw
lightly to attach the presser foot holder.
6. Place the presser foot “J” under the holder. Lower the
presser foot lever and use the screwdriver to tighten
the screw firmly.
Note
If the presser foot holder is not installed correctly, the thread
tension may loosen due to improper presser foot holder
height.
CAUTION
• Be careful not to touch the needle during this
time, otherwise injury may result.
• Use the screwdriver to tighten the presser foot
holder screw securely. If the screw is loose,
the needle may strike the presser foot and cause
injury.
Changing the Needle
CAUTION
• Turn the main power switch to OFF before changing the needle. If the main power is
left on and the Start/Stop button or another operation button is pressed accidentally,
the machine will start and injury may result.
• Use only sewing machine needles for home use. Other needles may bend or break and
cause injury.
• Never sew with a bent needle. A bent needle will easily break and cause injury.
To Check the Needle Correctly:
To check the needle, place the flat side of the needle on a flat surface. Check the needle from the
top and the sides. Throw away any bent needles.
1 Parallel space
2 Level surface (bobbin cover, glass, etc.)
* Place a level surface under the needle