Reattaching the presser foot holder -42 – Brother SuperGalaxie 3000 3000C 3000D 3100D User Manual
Page 53
Advertising
1-42
Setting Up
6
1
2
■ Reattaching the Presser Foot Holder
1. Push the “Needle Position” button to raise the needle,
then turn the main power switch to OFF.
2. Raise the presser foot lever.
3. Loosen the screw with the screwdriver, and remove
the walking foot.
4. Remove the low shank adapter.
Advertising
This manual is related to the following products: