Brother SuperGalaxie 3000 3000C 3000D 3100D - Manual (Page 99)

3-26 Sewing Utility Stitches
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
5
1
5. With the presser foot raised, align the presser foot holder
screw hole directly with the notch in the side cutter,
then insert the screw and lightly tighten it. Lower the
presser foot lever and firmly tighten the screw.
6. Select a stitch pattern.
If there is an “S” in the bottom of the key display, the
indicated stitch pattern can be sewn with the side cut-
ter.
Normal sewing
Zigzag stitch
Overcasting stitch for light and medium weight fab-
rics
Overcasting stitch for heavyweight fabrics
Overcasting stitch for medium and heavyweight stretch
fabrics
7. Make a cut of about 20 mm (3/4 inch) in the fabric.
1 20 mm (3/4 inch)