Brother SuperGalaxie 3000 3000C 3000D 3100D - Manual (Page 279)

7-4 My Custom Stitch
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
3. Select whether one stitch or three stitches will be sewn between
the first two points. To sew one stitch, press so that it ap-
pears as ; to sew three stitches, touch the key so that it ap-
pears as .
4. Use the keys to move to the coordinates of the first
point that was made on the grid sheet (from step 2 on page 7-1).
5. Press to add the point indicated by .
6. Repeat steps 3 through 5 for each point that you have drawn on
the grid sheet until the stitch design is drawn on the screen as a
continuous line.
Note
If you make a mistake while setting points, press the key to
erase the last point set.
7. Once you have finished entering the stitch data, press the
key.