HP XP P9500 Storage - Manual (Page 136)

• Port set for the server.http.localPort property (default: 24043/tcp)
For details about the ports used by the Hitachi Command Suite Common
Agent Component, see the manual Hitachi Command Suite Global Link
Manager Installation and Configuration Guide.
To add the ports to the exceptions list:
1
.
Log on as a member of the Administrators group.
2
.
Execute the firewall_setup command.
3
.
Check the displayed message to make sure that the command was
executed successfully.
The command ended successfully.
firewall_setup command syntax
If the host OS is Windows, the firewall_setup command is used to register
the ports used by the Hitachi Command Suite Common Agent Component as
firewall exceptions.
The firewall_setup command is stored in the following location, depending
on whether the Device Manager agent is installed.
• Device Manager agent is installed:
program-installation-destination-drive:\Program Files
# \Hitachi
\HDVM\HBaseAgent\bin\firewall_setup.bat
• Device Manager agent is not installed:
program-installation-destination-drive:\Program Files
# \HDVM
\HBaseAgent\bin\firewall_setup.bat
#
For Windows Server 2003 (excluding the x86 edition) , Windows Server
2008 (excluding the x86 edition) , or Windows Server 2012, Program
Files is Program Files (x86).
The following table describes the firewall_setup command syntax.
Table 3-13 firewall_setup command syntax
Item Details
Synopsis firewall_setup {-set|-unset}
Description Registers the following ports used by the Hitachi Command Suite
Common Agent Component in a Windows environment as firewall
exceptions:
•
Port set for the server.agent.port property (default: 24041/
tcp)
• Port set for the server.http.port property (default: 24042/
tcp)
3-68
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Windows ®