HP XP P9500 Storage - Manual (Page 333)

Message ID Message Text Explanation
reconfigured, click the Refresh
button.
KAPL02063-W The version number cannot be
displayed.
Details
The version number could not be
acquired because an attempt to
read a parameter file, which starts
up the HDLM GUI, failed.
Action
The version number cannot be
displayed, but HDLM GUI
operations can be executed. If you
want to display the version
number, reinstall HDLM.
KAPL02064-W The error monitoring interval
and the number of times that
the error is to occur conflict with
the automatic failback checking
interval.
Details
An intermittent error cannot be
detected by using the values
specified for the following: the
checking interval for automatic
failbacks, the error-monitoring
interval, and the number of times
the error needs to occur.
Action
Set the intermittent error-
monitoring interval to a value that
is equal to or greater than
(automatic-failback-checking-
interval x number-of-times-error-
is-to-occur-for-intermittent-error-
monitoring).
KAPL02065-W The getting PathInformation has
been stopped because the
configuration of paths was
changed during the processing
of the getting PathInformation.
Details
Updated path information could
not be acquired because the path
configuration was changed after
an Offline, Online, or Clear
Data operation was performed.
Action
After confirming that the paths
are not currently being
reconfigured, click the Refresh
button.
KAPL02076-W An attempt to acquire the HDLM
version information failed.
Details = aa...aa
Details
The HDLM version information
could not be acquired.
aa...aa: Code showing the reason
for the error
Action
Re-execute the command. If the
same error occurs again, execute
the DLMgetras utility for collecting
HDLM error information, and then
Messages
8-41
Hitachi Dynamic Link Manager User Guide for Windows ®