HP XP P9500 Storage - Manual (Page 354)

Message ID Message Text Explanation
The auto recover function
recovered a path.
This message is output if an error
occurs in all the paths to an LU
and one of the paths is recovered.
aa...aa: Path ID(same as PathID
of view -path) (decimal
(base-10) number)
Action
None.
KAPL08026-E An error occurred on all the
paths of the LU. PathID =
aa...aa
Details
An error occurred in the last,
remaining path of an LU. (This is
most likely as a result of a
disconnection.)
aa...aa: Path ID (same as PathID
of view -path) (decimal
(base-10) number)
Action
Find the KAPL05301-E message in
the event log to identify the
storage system that the error was
detected on and resolve the
problem.
KAPL08027-E A path was excluded from the
items subject to automatic
failback. PathID = aa...aa
Details
A path was excluded from being
subject to automatic failbacks
because the system judged that
an intermittent error was
occurring in that path.
aa...aa: Path ID (same as PathID
of view -path) (decimal
(base-10) number)
Action
An intermittent error has
occurred. Check the path for any
possible problems. For details on
what to do, see What To Do for a
Path Error on page 5-4 , and
switch the path shown in the
message to Online.
KAPL08032-I A path was recovered. (PathID
= aa...aa)
Details
The path has changed to an online
status.
aa...aa: Path ID (same as PathID
of view -path) (decimal
(base-10) number)
Action
None
8-62
Messages
Hitachi Dynamic Link Manager User Guide for Windows ®