HP XP P9500 Storage - Manual (Page 281)

Item name Value
version Version of the installed HDLM #
#
The version that is output is the same as what is output for HDLM Version
when the HDLM command is executed with -sys specified for the view
operation. Note that when a service pack has been installed, the version
in Service Pack Version is output instead.
Each item and value is enclosed in double quotation marks (") and is output
in CSV format.
The installhdlm Utility for Installing HDLM
The installhdlm utility can perform a new installation, upgrade installation,
or re-installation of HDLM in the unattended installation mode. How the utility
should respond during an installation, and the HDLM function settings must
be predefined in an installation-information settings file.
You can also use this utility later to check the information that was set during
installation.
To perform an unattended installation, store the utility in the following
location:
drive-where-the-installation-DVD-has-been-inserted:\HDLM_Windows
\DLMTools
The utility to display the information set during installation is stored in the
following location:
HDLM-installation-folder\bin
For details about the procedure for performing an unattended installation, see
Performing a New Installation of HDLM on Windows Server 2003 on page
3-29 or Performing a New Installation of HDLM on Windows Server 2008 and
Windows Server 2012 on page 3-52 .
Format
installhdlm {-f installation-information-settings-file-name [-
c ]| -v| -h}
Parameters
-f installation-information-settings-file-name
Sets the information required to perform an installation.
For details about the installation-information settings file, see
Contents of
an Installation-Information Settings File on page 7-18 .
Utility Reference
7-17
Hitachi Dynamic Link Manager User Guide for Windows ®