HP XP P9500 Storage - Manual (Page 233)

-iem
Use this parameter to add IEP to path information and display
information about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The parameter values available to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the channel adapter
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-exlu
• When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
• When the only HDLM management-target devices are the Thunder
9500V series, Lightning 9900 series, Lightning 9900V series,
Hitachi USP series, Hitachi AMS2000/AMS/WMS/SMS series,
HUS100 series, Universal Storage Platform V/VM series, or Virtual
Storage Platform series:
16 digits will be displayed for the iLU, even if this parameter is
specified.
-hbaportwwn
Displays port WWN information for the HBAs connected to the storage
system.
-t
Omits the title for each information item.
Example
When the -exlu parameter is not specified:
Command Reference
6-43
Hitachi Dynamic Link Manager User Guide for Windows ®