HP XP P9500 Storage - Manual (Page 363)

Message ID Message Text Explanation
After the installation finishes,
without rebooting, execute the
dlmprsvkey utility for registering
an HDLM persistent reservation
key to register the PRSV key. For
details on the dlmprsvkey utility,
see The dlmprsvkey Utility for
Registering an HDLM Persistent
Reservation Key on page 7-12 .
KAPL09134-E The HDLM path cannot be added
to the Path environment
variable.
Refer to the Messages section of
the HDLM User's Guide for
instructions to correct this
problem.
Details
The HDLM path could not be
added to the Path environment
variable.
Action
Edit the Path environment
variable so that it stays within the
following length after adding the
HDLM paths.
In Windows Server 2003 SP1 or
Windows Server 2003 R2 (no
service pack), if the Path
environment variable was rounded
down to 1,024 bytes, and the
Microsoft patch to solve this
problem has been applied:
2,047 bytes
In Windows Server 2003 SP1 or
Windows Server 2003 R2 (no
service pack), if the Path
environment variable was rounded
down to 1,024 bytes, but the
Microsoft patch program to solve
this problem has not been
applied:
1,023 bytes
When the HDLM default path is
specified, the following three file
paths are added to the
environment variable:
Windows Server 2003 (x86) and
Windows Server 2008 (x86) (213
bytes including the added ";")
¢
C:\Program Files\HDVM
\HBaseAgent\bin
¢
C:\Program Files\HDVM
\HBaseAgent\util\bin
¢
C:\Program Files\HITACHI
\DynamicLinkManager\bin
¢
C:\Program Files\HITACHI
\DynamicLinkManager\lib
Messages
8-71
Hitachi Dynamic Link Manager User Guide for Windows ®