Port wwn and path name, see, Parameters used when displaying path – HP XP P9500 Storage User Manual
Page 232
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Parameters Used When Displaying Path Information
When displaying path information, if you specify either the -item or -c
parameter and also specify the -path parameter, you can select the items to
display and display a summary of path information. This section describes
each parameter, path information and displayed items.
Parameters to display path information:
-path
When you specify the -path parameter and do not specify either the -c or
-item parameter, the information will be displayed about the HDLM
managed paths without abbreviating or selecting items.
In the sub-parameters (following -path), you can filter the paths to be
listed using -hdev and sort the list using -srt. When you omit both
parameters, the command displays information for all the paths in order
of ascending AutoPATH_IDs.
For details on what is displayed in each item, see
AutoPATH_IDs displayed by the -path parameter depend on the sequence
in which HDLM detects the paths after a host is started up. Because of
this, make sure that you use the path name PathName to identify a path.
The sub-parameters are as follows:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
Specify a drive letter to indicate the desired host device. You cannot
specify the host device unless a drive letter has been assigned. The
host-device-name string is case sensitive. If the command ends with
the KAPL01064-W or KAPL01013-E message, follow the recommended
action in the message.
-stname
Use this parameter for the Thunder 9500V series, Lightning 9900
series, Lightning 9900V series, Hitachi USP series, Hitachi AMS2000/
AMS/WMS/SMS series, HUS100 series, Universal Storage Platform V/
VM series, or Virtual Storage Platform series to display the model ID
of the storage system in the product ID element of the DskName field.
When this parameter is omitted, the command displays the product ID
or emulation type of the storage system instead.
For details about the information displayed for product IDs, see
6-15 Product ID Displayed by the View -path Operation on page
6-42
Command Reference
Hitachi Dynamic Link Manager User Guide for Windows
®