HP XP P9500 Storage - Manual (Page 345)

Message ID Message Text Explanation
bb...bb, Port Number= cc...cc,
Community = dd...dd, Trap
Data = ee..ee
bb...bb: Destination IP address of
the trap
cc...cc: Destination port number
of the trap
dd...dd: Community name given
to the trap
ee...ee: Transmission data
Action
None.
KAPL04053-W The option definition file was
recovered from a work file.
Action
Execute the dlnkmgr view -sys
command to check whether the
settings are recovered. If the
settings are not recovered,
execute the dlnkmgr set
operation to recover the settings.
For details on the view operation,
see view (Displays Information)
on page 6-32 . For details on the
set operation, see set (Sets Up
the Operating Environment) on
page 6-16 .
KAPL04054-I The owner controller will now be
revised. (number of LUs =
aa...aa)
Details
aa...aa: number of targeted LUs
Action
None.
KAPL04055-I The owner controller was
revised. (number of changed
LUs = aa...aa)
Details
aa...aa: number of changed LUs
Action
None.
KAPL04056-W The owner controller cannot be
revised because no paths are in
the Online status. (LU = aa...aa)
Details
aa...aa: ID (serial number + iLUN)
of the LU that was not revised
Action
Recover the paths from the
failure, and then place them in the
Online status, or exclude the LU
from dynamic I/O path control.
KAPL05001 to KAPL06000
Message ID Message Text Explanation
KAPL05001-I DriverEntry() started.
0 Details
The initialization function was
executed.
Messages
8-53
Hitachi Dynamic Link Manager User Guide for Windows ®