HP NonStop G-Series - Manual (Page 111)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-22
Unlock Code
Unlock Code
*”XXXX” *”XXXX”
ENTER to Accept ENTER to Accept
ESCAPE to Exit ESCAPE to Exit
Figure 6-17 Code Accept Submenu
Press the Enter button when the unlock code that is displayed is
acceptable. Press the Escape button if it is not acceptable. Press the
Escape button again to return to the Main Menu, and again to
return to the Default Screen.
6.11 Unlocking the Control Panel
Once the control panel is locked via the Security Menu, the
operator will be asked to enter the security code each time an
attempt to enter Menu Mode is made. The security code entry
screen is shown in Figure 6-18.
Front Panel Locked
Front Panel Locked
ENTER to Unlock ENTER to Unlock
ESCAPE to Exit ESCAPE to Exit
Figure 6-18 Panel Locked Screen