HP NonStop G-Series - Manual (Page 37)

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide
Unpacking and Installing the 5157/5157 ACL Tape Subsystem
2-20
2.7 The S-series Cabinetry Rear Cover
The S-series Cabinetry has an ESD Rear Cover that needs to be
attached. Figure 2-18 is a picture of the Rear Cover on the S-series
Cabinetry. The purpose of the cover is to protect the Backend Board
(BEB) and the fiber cabling.
Figure 2-18 S-series Cabinetry with a Rear Cover Attached
The S-series Cabinetry Rear Cover will be shipped with the following
components:
•
The Rear Cover
•
6 Pushbutton Rivets
Notice
where
the
Rivets
are on
the
cover