HP NonStop G-Series - Manual (Page 97)

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-8
6.5.1 Power-On Self Test Screen
When power is first applied to the module, a series of power-on self
test (POST) diagnostics are performed. During POST execution,
the model number of the module, the current date and time, the
firmware revision, and the status or result of the test in progress are
displayed on the control panel as shown in Figure 6-3.
5157 ACL 5157 ACL
Firmware Level 0X.xx Firmware Level 0X.xx
Checking Hardware Checking Hardware
Figure 6-3 POST Screen
6.5.2 Initialization Screens
After the POST is completed, the library robotics system begins its
initialization. A series of screens similar to Figure 6-4 are displayed
during this process.
5157 ACL 5157 ACL
Firmware Level 0X.xx Firmware Level 0X.xx
Initializing Loader Initializing Loader
26 26- -Feb Feb- -19xx 15:35:59 19xx 15:35:59
Figure 6-4 Initialization Screen