HP NonStop G-Series - Manual (Page 145)

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide
Installing and Configuring the 5157/5157 ACL Digital Linear Tape Subsystem
for S-Series Servers
7-20
7.4.2 Daisy Chain Configuration
The right 68-pin SCSI port is daisy chained to the next drive in the
subsystem. On the next drive, the left most port is terminated
instead of being connected to the 50-pin SCSI port. Figure 7-11
illustrates how the 68-pin SCSI ports are connected.
Figure7-9 Two 5157 ACL’s Daisy Chained in the
Subsystem
NOTE: The SCSI ID’s on each drive need to be set at a different number.
Refer to Chapter 3; section 3.4.3 Changing the SCSI ID for the 5157 drive.
Refer to Chapter 5; section 5.3.1 Setting the SCSI ID for the 5157 ACL
drive.