HP NonStop G-Series - Manual (Page 158)

The 5157/5157 ACL S-Series Subsystems Installation/Users Guide
Appendix A
v
FSC Displayed Message ERP
5014 DLT Already
Loaded
Press Enter to
Clear F
5015 Expired Clean’g
Cart
Press Enter to
Clear F
5016 Not a Clean’g
Cart
Press Enter to
Clear F
5020 All DLTs/Slots
Empty
Press Enter to
Clear F
5039 Invalid Unlock
Code
Press Enter to
Clear F*
* If the unlock code is unavailable, contact the system
administrator.
If an error message is displayed that is not included in Table A-2,
please write down the fault code number and follow the recovery
procedure described on line 4 of the display. If the same error
occurs again, call the technical representative.