Setting quicktools preferences – HP Switch SFP Modules User Manual
Page 17
Using QuickTools
Setting QuickTools Preferences
59273-00 C
7
Selected ports in the faceplate display are outlined in blue. You can select ports
the following ways.
To select a port, click the port.
To select all ports, right-click on the faceplate image and select Select All
Ports from the popup menu.
To select a range of consecutive ports, click a port, press the Shift key and
click another port. The web applet selects both end ports and all ports in
between the end ports.
To select several non-consecutive ports, press the Control key while
clicking each port.
To un-select ports in a group of selected ports, press the Control key while
clicking each port.
To cancel a selection, press the Control key and select it again.
Setting QuickTools Preferences
Using the preferences settings, you can:
Change the location of the working directory in which to save files.
Change the location of the browser used to view the online help. The
Browser Location field is not supported/displayed for Mac OS X.
Select a Display Dialog When Making Non-secure Connections option. If
enabled, the Non-secure Connections Check dialog is displayed when you
attempt to open a non-secure fabric. You then have the option of opening a
non-secure fabric. If disabled, you cannot open a fabric with a non-secure
connection).
Enable (default) or disable the Event Browser. Refer to
. If the Event Browser is enabled using the
Preferences dialog (
) the next time QuickTools is started, all
events will be displayed. If the Event Browser is disabled when QuickTools is
started and later enabled, only those events from the time the Event
Browser was enabled and forward will be displayed.
NOTE:
When using the Shift key to select a range of ports, the first port you click in
the range is the anchor selection. Subsequent ranges are based on this
anchor selection. For example, after clicking port 4 and port 7 respectively,
port 4 becomes the anchor selection. The next range includes all ports
between port 4 and the next port you select.