HP Switch SFP Modules - Manual (Page 53)

Managing H3C LSW1FC4P0 Interface Card
Configuring an H3C LSW1FC4P0 Interface Card
59273-00 C 43
Figure 2-24. SNMP v3 User Editor Dialog
Table 2-11 describes the SNMP v3 User Editor dialog parameters. After
configuring the user, click the OK button to save the settings and close the dialog.
Table 2-11. SNMP v3 User Editor Dialog
Parameter Description
User Name Name for this SNMPv3 user.
Group Read Only permits user to view only SNMPv3 user settings. Read
Write permits user to view and change SNMPv3 user settings.
Authentication
Type None, MD5, SHA. If None, no authentication phrase is required. MD5
and SHA require authentication phrase.
Authentication
Phrase A unique string or phrase to serve as an password-like authentica-
tion phrase.
Confirm Authen-
tication Phrase Re-enter the same unique string or phrase to serve as an pass-
word-like authentication phrase.
Privacy Type DES or None. If None, no privacy phrase is required.
Privacy Phrase A unique string or phrase to serve as an password-like privacy
phrase.
Confirm Privacy
Phrase Re-enter the unique string or phrase to serve as an password-like
privacy phrase.