HP Switch SFP Modules - Manual (Page 18)

Using QuickTools
Setting QuickTools Preferences
8 59273-00 C
 Choose the default port view when opening the faceplate display. You can
set the faceplate to reflect the current port type (default), port speed, port
operational state, or port transceiver media. Regardless of the default port
view you choose, you can change the port view in the faceplate display by
opening the View menu and selecting a different port view option. Refer to
the corresponding subsection for more information:
 ”Port Types” on page 3-79
 ”External Port Operational States” on page 3-76
 ”Port Speeds” on page 3-80
 ”Port Transceiver Media Status” on page 3-80
Figure 1-4. Preferences Dialog – QuickTools
To set preferences for your QuickTools sessions, do the following:
1. Open the File menu, and select Preferences to open the Preferences
dialog.
2. Enter, or browse, for paths to the working directory and browser.
3. In the Application-wide Options area, choose the preferences you want.
4. Click the OK button to save the changes.