HP Switch SFP Modules - Manual (Page 64)

Managing H3C LSW1FC4P0 Interface Card
Installing Firmware
54 59273-00 C
After an NDCLA operation is complete, management connections must be
re-initiated:
 QuickTools sessions will re-connect automatically
 Telnet sessions must be restarted manually.
The applicable code versions are:
 Future H3C LSW1FC4P0 Interface Card code releases will be upgraded
non-disruptively unless specifically indicated in its associated release notes
 An NDCLA operation to previous H3C LSW1FC4P0 Interface Card code
releases is not supported.
The Load Firmware dialog ( Figure 2-29 ) allows you to select and install a firmware
image file. To open the Load Firmware dialog for an individual switch, open the
Switch menu and select Load Firmware. When the Load Firmware dialog is
opened, the path displayed in the Firmware Image Folder field is automatically
searched for firmware image files that can be installed. The default path to search
for firmware image files is the user's working directory. To change the path, click
the Browse button and select a new path. Click the Rescan button to search the
folder displayed in the Firmware Image Folder field. The firmware image files
found are listed in and can be selected from the Version drop-down list.
Figure 2-29. Load Firmware Dialog
NOTE:
Some NDCLA restrictions may apply when upgrading some versions of
firmware. Please contact the appropriate technical support for specific
details before upgrading firmware.