HP Switch SFP Modules - Manual (Page 40)

Managing H3C LSW1FC4P0 Interface Card
Configuring an H3C LSW1FC4P0 Interface Card
30 59273-00 C
Managing System Services
The System Services dialog ( Figure 2-15 ) provides a central location for you to
enable or disable any of the external user services such as Simple Network
Management Protocol (SNMP), embedded web applet, command line interface,
Network Time Protocol (NTP), and Common Information Model (CIM). To display
the System Services dialog, open the Switch menu and select Services.
Figure 2-15. System Services Dialog
Use caution when disabling the Embedded GUI, GUI Mgmt, and Telnet, as it is
possible to disable all access to the H3C LSW1FC4P0 Interface Card except
through a serial connection.
 Embedded GUI (Graphical User Interface) — allows users to point a
browser at the H3C LSW1FC4P0 Interface Card and use QuickTools.
 GUI Mgmt — allows out-of-band management of the H3C LSW1FC4P0
Interface Card from the H3C LSW1FC4P0 Interface Card management
application (GUI). If disabled, the H3C LSW1FC4P0 Interface Card can not
be specified as the entry H3C LSW1FC4P0 Interface Card for a fabric in the
GUI, but can still be managed through an in-band connection.
 Telnet (Command line interface) — allows users to manage the H3C
LSW1FC4P0 Interface Card through a Telnet command line interface
session. Disabling Telnet access to the H3C LSW1FC4P0 Interface Card is
not recommended.