HP Switch SFP Modules - Manual (Page 39)

Managing H3C LSW1FC4P0 Interface Card
Configuring an H3C LSW1FC4P0 Interface Card
59273-00 C 29
H3C LSW1FC4P0 Interface Card Administrative States
The H3C LSW1FC4P0 Interface Card administrative state determines the
operational state of the H3C LSW1FC4P0 Interface Card. The H3C LSW1FC4P0
Interface Card administrative state exists in two forms: the configured
administrative state and the current administrative state.
 Configured administrative state — the state that is saved in the H3C
LSW1FC4P0 Interface Card configuration and is preserved across H3C
LSW1FC4P0 Interface Card resets. QuickTools always makes changes to
the configured administrative state. The configured administrative state is
displayed in the Switch Properties dialog.
 Current administrative state — the state that is applied to the H3C
LSW1FC4P0 Interface Card for temporary purposes and is not retained
across H3C LSW1FC4P0 Interface Card resets. The current administrative
state is set using the Set Switch command.
Table 2-6 describes the administrative state values.
ENODE MAC Address Configuration
Enabling the RequireEnodeMACAddressConfig parameter performs MAC
address checking to ensure that each FCF responds to one and only one CNA
when connecting to more than one Fibre Channel fabric.
Table 2-6. H3C LSW1FC4P0 Interface Card Administrative States
Parameter Description
Online The H3C LSW1FC4P0 Interface Card is available.
Offline The H3C LSW1FC4P0 Interface Card is unavailable.
Diagnostics The H3C LSW1FC4P0 Interface Card is in diagnostics mode, is
unavailable, and tests can then be run on all ports of the H3C
LSW1FC4P0 Interface Card.