HP Switch SFP Modules - Manual (Page 56)

Managing H3C LSW1FC4P0 Interface Card
Restoring the Factory Default Configuration
46 59273-00 C
4. To restore all configuration settings, click the Full Restore tab, then click the
Restore button. To restore selected configuration settings, click the
Selective Restore tab and select one or more of the following options, then
click the Restore button:
 Network Properties—restores all settings presented in the Network
properties dialog except the IP address. Refer to
”SNMP Properties”
on page 2-39 .
 IP Address—restores H3C LSW1FC4P0 Interface Card IP address in
addition to the other network properties
 Port Properties—restores all settings presented in the Port properties
dialog. Refer to
”Port Symbolic Name” on page 3-75 .
 Call Home—restores all Call Home configuration and profiles settings
 Switch Properties—restores all settings presented in the Switch
Properties dialog except the domain ID. Refer to
”Switch Properties”
on page 2-27 .

Domain ID—restores the H3C LSW1FC4P0 Interface Card domain ID
in addition to the other switch properties.
 Radius Server Info—restores all RADIUS server information defined in
the switch database
 FCoE Settings—restores the last saved VLAN and FCF configurations
5. Click the OK button and view the results in the top pane of the Restore
dialog.
Restoring the Factory Default Configuration
You can restore the H3C LSW1FC4P0 Interface Card and port configuration
settings to the factory default values. To restore the factory configuration on an
H3C LSW1FC4P0 Interface Card, open the Switch menu and select Restore
Factory Defaults.
Table 2-12 lists the factory default H3C LSW1FC4P0 Interface
Card configuration settings.
Restoring the H3C LSW1FC4P0 Interface Card to the factory default configuration
does not restore the account name and password settings.To restore user
accounts, you must select the Reset User Accounts to Default option in the
maintenance menu. Refer to “Recovering a Switch” in the Installation Guide for
your H3C LSW1FC4P0 Interface Card for information about maintenance mode
and the maintenance menu.