Starting the hdlm manager, Stopping the hdlm manager, Starting the hdlm manager -15 – HP XP7 Storage User Manual
Page 177: Stopping the hdlm manager -15, To the procedure in
Starting the HDLM Manager
During installation, the HDLM manager is registered as a Windows service
and the startup type is set to Automatic. This means that when Windows
starts, the HDLM manager will also start automatically.
If, for some reason, the HDLM manager does not automatically start, do the
following:
Log on to Windows as a member of the Administrators group. From Control
Panel, choose Administrative Tools, and then Services. In Windows
Server 2008 or Windows Server 2012, log on using the Administrator
account, and then from the Control Panel, choose Administrative Tools
and Services. From the list of services, double-click DLMManager, and then
click the Start button.
Use the following dlnkmgr command's view operation to confirm that the
HDLM manager has started.
PROMPT>dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
When the HDLM Manager column shows Alive, the HDLM manager is active.
Stopping the HDLM Manager
When you remove, upgrade, or re-install HDLM, the HDLM manager will
automatically stop.
If, for some reason, the HDLM manager does not automatically stop, stop it
as follows:
Log on to Windows as a member of the Administrators group. In Control
Panel, choose Administrative Tools, and then Services. In Windows
Server 2008 or Windows Server 2012, log on using the Administrator
account, and then from the Control Panel, choose Administrative Tools,
and then Services. From the list of services, double-click DLMManager, and
then click the Stop button.
Use the following dlnkmgr command's view operation to confirm that the
HDLM manager has stopped.
PROMPT>dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Dead
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
When the HDLM Manager column shows Dead, the HDLM manager is inactive.
HDLM Operation
4-15
Hitachi Dynamic Link Manager (for Windows®) User Guide