HP XP7 Storage - Manual (Page 221)

Value Description
on -force The LU is removed from HDLM-management when all the paths to the
LU are disconnected, even when an Offline(C) path is included.
The removed LU is restored after it is recovered from the physical
failure and the disk is re-scanned.
-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss][a][ca]|all]]|off}
Specifies whether to collect audit log data.
on: Audit log data is collected.
off: Audit log data is not collected.
-audlv audit-log-data-collection-level
Specifies the severity level that determines the selection of audit log
data to be collected. The table below lists and describes the values
used for this setting. The default is 6.
Table 6-8 Values Indicating Audit Log Data Collection Levels
Value (severity) Explanation
0 Error-level audit log data is collected.
1
2
3
4 Error-level and Warning-level audit log data is collected.
5
6 Error-level, Warning-level, and Information-level audit log data is
collected.
7
-category [[ss][a][ca]|all]
Specifies the categories of audit log data to be collected. The table below
lists and describes the values used for this setting. The default is all.
Note that if you enter -category without specifying any category (ss, a,
ca, or all), it is assumed that all is specified.
Table 6-9 Values Indicating Audit Log Data Categories
Value Explanation
ss Audit log events of the StartStop category are collected.
a Audit log events of the Authentication category are collected.
ca Audit log events of the ConfigurationAccess category are
collected.
Command Reference
6-29
Hitachi Dynamic Link Manager (for Windows®) User Guide