HP XP7 Storage User Manual
Page 256
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-31
.
-hdev host-device-name|-pathid AutoPATH_ID
Displays information only for the paths accessing the specified host
device, if the -hdev parameter is specified.
Specify a drive letter to indicate the desired host device. You cannot
specify the host device unless a drive letter has been assigned. If the
command ends with the KAPL01064-W or KAPL01013-E message,
follow the recommended action in the message.
If the -pathid parameter is specified, only information about the LU
connected to the path with the specified AutoPATH_ID is displayed.
-exlu
•
When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th
digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
•
When an HDLM management-target device is only the Thunder
9500V series, Lightning 9900V series, Hitachi USP series, Hitachi
AMS2000/AMS/WMS/SMS series, HUS100 series, Universal
Storage Platform V/VM series, or Virtual Storage Platform series:
16 digits or less are displayed for the iLU even if this parameter is
specified.
-t
Omits the title for each information item.
Example 1:
The following example shows how to add SLPR, PathName, ChaPort,
CLPR, Type IO-Count, IO-Errors, DNum, and IEP to the displayed
items for LU information.
6-64
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide