HP XP7 Storage - Manual (Page 268)

- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.
#3
The drive letter assigned to a dynamic disk volume is not displayed.
#4
In a cluster configuration, an offline operation requested during reserve
processing is put into the waiting-to-execute state, and does not execute
until the reserve processing finishes.
#5
This storage system applies when the dynamic I/O path control function is
disabled.
Parameter Used When Displaying the Format of the view Operation
-help
Use this parameter to display the view operation format.
Example
PROMPT>dlnkmgr view -help
view:
Format
dlnkmgr view -sys [ -sfunc | -msrv | -adrv | -pdrv | -lic| -
audlog
| -lbpathusetimes | -expathusetimes | -
pstv ] [-t]
dlnkmgr view -stinfo [-t]
dlnkmgr view -path [-pstv | -vstv] [ -hdev HostDeviceName ] [-
stname] [-iem]
[-srt {pn | lu | cp}] [-exlu] [-
hbaportwwn] [-t]
dlnkmgr view -path
-item [pn] [dn] [lu] [cp] [type] [ic] [ie] [dnu]
[hd] [iep] [hbaportwwn]
[phys] [virt] [vid] [ha]
[-pstv | -vstv] [-hdev HostDeviceName ] [-stname] [-srt
{pn | lu | cp}] [-exlu] [-t]
dlnkmgr view -path -c [-pstv | -vstv] [-stname] [-srt {lu | cp}]
[-t]
dlnkmgr view -lu [-pstv | -vstv][ -hdev HostDeviceName | -pathid
AutoPATH_ID ] [-exlu] [-t]
dlnkmgr view -lu
-item [ [slpr] [pn] [cp] [clpr] [type] [ic] [ie]
[dnu]
[iep] [dpc] [phys] [virt] [vid] [ha]
[hastat] | all ]
[-pstv | -vstv] [ -hdev HostDeviceName | -
pathid AutoPATH_ID ] [-exlu] [-t]
dlnkmgr view -lu -c [-pstv | -vstv] [-exlu] [-t]
dlnkmgr view -lu -c -item [slpr] [-pstv | -vstv] [-exlu] [-t]
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
6-76
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide