HP XP7 Storage - Manual (Page 258)

¢
For the EMC DMX series and EMC CX series, LU information is
displayed for each vendor ID.
¢
For the HP EVA series, LU information is displayed for each
vendor_ID_product_ID.
You cannot specify the -c parameter together with the -hdev or -pathid
parameter.
For details on the contents of each display item, see
Table 6-19 Displayed
LU Information on page 6-69 .
The sub-parameters are as follows:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-31 in
Parameters on page 6-16 .
-exlu
• When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
• When an HDLM management-target device is only the Thunder
9500V series, Lightning 9900V series, Hitachi USP series, Hitachi
AMS2000/AMS/WMS/SMS series, HUS100 series, Universal
Storage Platform V/VM series, or Virtual Storage Platform series:
16 digits are displayed for the iLU even if this parameter is
specified.
-t
Omits the title for each information item.
Example
When the -exlu parameter is not specified:
6-66
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide