Set (sets up the operating environment), Format, Parameters – HP XP7 Storage User Manual
Page 208: Set (sets up the operating environment) -16, Format -16, To set up the hdlm operating environment -16, To display the format of the set operation -16, Parameters -16, Operation, see, On how to specify the settings, see
status of, has been deleted, and then resolve the path error. For details, see
Deleting an LU Dynamically on page 4-19
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set Up the HDLM Operating Environment
dlnkmgr set {-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk{on[-intvl check-interval]|off}
|-afb {on [-intvl check-interval]|off}
|-iem {on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur]|off}
|-lic
|-rmlu {on [-force]|off}
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss][a][ca]|all]]|off}
|-lbpathusetimes number-of-path-use-times
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
|-pstv {on|off}
}
[-s]
To Display the Format of the Set Operation
dlnkmgr set -help
Parameters
To Set Up the HDLM Operating Environment
The table below shows the defaults and recommended values for each
setting. If you change the value of the set operation, the new value takes
effect immediately.
6-16
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide