HP XP7 Storage - Manual (Page 57)

¢
Collects error information from the Warning level and higher.
¢
Collects error information from the Information level and higher
(information from all the levels is collected).
¢
Collects error information from the Information level and higher
(including maintenance information).
Collection levels for log information in trace files:
¢
Outputs no trace information
¢
Outputs error information only
¢
Outputs trace information on program operation summaries
¢
Outputs trace information on program operation details
¢
Outputs all trace information
For details on how to change the collection level, see Setting Up the HDLM
Functions on page 3-72 .
Collecting Error Information Using the Utility for Collecting HDLM
Error Information (DLMgetras)
HDLM provides the DLMgetras utility for collecting HDLM error information.
By using the DLMgetras utility, you can simultaneously collect all the
information required for analyzing errors: information such as error logs,
integrated trace files, trace files, definition files, and information on the OS.
You can use the collected information for when you contact your HDLM
vendor or maintenance company.
For details on the DLMgetras utility, see The DLMgetras Utility for Collecting
HDLM Error Information on page 7-2 .
Collecting Audit Log Data
HDLM and other Hitachi storage-related products provide an audit log
function so that compliance with regulations, security evaluation standards,
and industry-specific standards can be shown to auditors and evaluators. The
following table describes the categories of audit log data that Hitachi storage-
related products can collect.
Table 2-9 Categories of Audit Log Data That Can Be Collected
Category Explanation
StartStop An event indicating the startup or termination of hardware
or software, including:
•
OS startup and termination
• Startup and termination of hardware components
(including micro-program)
HDLM Functions
2-37
Hitachi Dynamic Link Manager (for Windows®) User Guide