HP Photosmart C6340 All-in-One Printer - Manual (Page 100)

To save photos
1. Insert a memory card into the appropriate slot on the product or connect a storage
device to the front USB port.
2. Press the right arrow button until Save is highlighted, and then press OK.
NOTE: If the product is network-connected, a list of available computers
appears. Select the computer to which you want to transfer the photos, and then
continue to the next step.
3. Follow the onscreen prompts on your computer to save the photos to your computer.
Edit photos using the control panel
The HP All-in-One offers several basic editing features that you can use to edit your
photos manually before you print them, as well as a feature that enables you to
automatically enhance your photos.
This section contains the following topics:
• Remove red-eye
• Rotate a photo
• Zoom and pan to crop a photo
• Automatically enhance your photos
• Print a frame around your photo
• Adjust the brightness of your photos
• Apply special color effects to your photos
Remove red-eye
The flash on a camera (especially on older camera models) can sometimes cause a
subject's eyes to appear red in your photos. The HP All-in-One is set to automatically
remove redness so that eyes appear the correct shade in your photos.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
NOTE: This feature is only available when a memory card or storage device is
inserted.
To remove red-eye from photos
▲ By default, red-eye correction is automatically applied to all photos in the print queue.
To turn off this feature, press the Red-Eye Removal button on the control panel when
a memory card or storage device is inserted.
Related topics
“Print photos” on page 94
Edit photos using the control panel 97
Phot
os