Printhead appears to be missing or damaged – HP Photosmart C6340 All-in-One Printer User Manual

Page 282

Advertising
background image

NOTE:

HP recommends that you do not leave the ink cartridge outside of the

printer for an extended period of time. If a used cartridge is installed, check the
print quality. If it is not satisfactory, run the cleaning procedure from the toolbox.

Cause: The genuine HP ink cartridge was previously used in some other product.

Printhead appears to be missing or damaged

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

Solution 1: Reinstall the printhead and cartridges

Solution 2: Contact HP support

Solution 1: Reinstall the printhead and cartridges

Solution: If you just installed the printhead and ink cartridges, remove and reinsert
them using the following procedure.

NOTE:

If you are setting up the product for the first time, make sure you follow

the instructions in the Start Here guide for installing the printhead and the ink
cartridges.

To reinstall the printhead

1.

Make sure that the product is turned on.

2.

Open the ink cartridge door.

Errors

279

Trou

bles

ho

ot

ing

Advertising