Print the wireless network test – HP Photosmart C6340 All-in-One Printer User Manual
Page 42
3.
Press the down arrow button until Wireless Radio is highlighted, and then press
OK.
4.
Press the down arrow button to highlight On or Off, and then press OK.
Print the wireless network test
The wireless network test performs a series of diagnostic tests to determine whether
network setup is successful. If an issue is detected, a recommendation on how to correct
the issue will be included on the printed report. You can print the wireless network test at
any time.
To print the wireless test report
1.
Press Setup.
2.
Press the down arrow button until Network is highlighted, and then press OK.
3.
Press the down arrow button until Wireless Network Test is highlighted, and then
press OK.
The Wireless Network Test prints.
Related topics
“Network troubleshooting” on page 149
Change advanced network settings from the control panel settings
The advanced network settings are provided for your convenience. However, unless you
are an advanced user, you should not change any of these settings.
This section contains the following topics:
•
•
Set link speed
You can change the speed at which data is transmitted over the network. The default is
Automatic.
To set link speed
1.
Press Setup.
2.
Press the down arrow button until Network is highlighted, and then press OK.
Connect to a computer
39
Finish
set
up