Troubleshooting, View the readme file, Setup troubleshooting – HP Photosmart C6340 All-in-One Printer User Manual

Page 142: 14 troubleshooting, View the readme file setup troubleshooting

Advertising
background image

14 Troubleshooting

This section contains the following topics:

View the Readme file

Setup troubleshooting

Network troubleshooting

Paper jams

Print quality troubleshooting

Print troubleshooting

Memory card troubleshooting

Scan troubleshooting

Copy troubleshooting

Errors

View the Readme file

You can refer to the Readme file for information on system requirements and possible
installation problems.
You can access the Readme file by clicking Start, pointing to Programs or All
Programs
, pointing to HP, pointing to Photosmart C6300 All-in-One series, and then
clicking Readme.
You can access the Readme file by double-clicking the icon located in the top-level folder
of the HP Photosmart Software CD-ROM.

Setup troubleshooting

This section contains setup troubleshooting information for the product.
Many issues are caused when the product is connected to the computer using a USB
cable before the HP Photosmart software is installed on the computer. If you connected
the product to your computer before the software installation screen prompts you to do
so, you must follow these steps:

Troubleshooting common setup issues

1.

Disconnect the USB cable from the computer.

2.

Uninstall the software (if you have already installed it).
For more information, see

“Uninstall and reinstall the software” on page 148

.

3.

Restart your computer.

4.

Turn off the product, wait one minute, then restart it.

5.

Reinstall the HP Photosmart software.

CAUTION:

Do not connect the USB cable to the computer until prompted by the

software installation screen.

Setup troubleshooting

139

Trou

bles

ho

ot

ing

Advertising