HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 10)

Introduction 10
Command Changes Virtual Connect
3.15 Virtual Connect 3.30
help role
show role
set role
The new object "role"
is supported in VC
3.30, enabling you to
manage the preferred
authentication order
for each VC user
access role (privilege).
Not supported All of these commands
are supported.
add server-port-map-range
help server-port-map-range
remove server-port-map-range
The new object
"server-port-map" is
supported in VC 3.30,
enabling you to
manage ranges of
shared server
downlink port
mapping
configurations.
Not supported All of these commands
are supported.
help statistics-throughput
show statistics-throughput
set statistics-throughput
The new object
"statistics-throughput"
is supported in VC
3.30, enabling you to
manage the port
throughput statistics.
Not supported All of these commands
are supported.
add storage-management
help storage-management
remove storage-management
show storage-management
set storage-management
The new object
"storage-management
" is supported in VC
3.30, enabling you to
manage iSCSI storage
management
information.
Not supported All of these commands
are supported.
help tacacs
show tacacs
set tacacs
The new object
"tacacs" is supported
in VC 3.30, enabling
you to manage
TACACS+
authentication.
Not supported All of these commands
are supported.
show uplinkport
show server-port
Enhanced the output
for these commands to
display the cause of an
unlinked port with no
connectivity
Cause not
displayed Cause displayed
uplinkset The "copy"
subcommand was
added to this
command, enabling
you to copy an uplink
set.
Not supported The copy
uplinkset
command is
supported.