HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 70)

Command line 70
profile
Manage server profiles.
Supported actions: add, assign, copy, help, load, remove, save, set, show, unassign
Item Description
add profile Create a new server profile. After the profile is created, the profile can be
configured using the "set" subcommand, and additional network, fabric, and FCoE
connections can also be added. The server profile can also be assigned to a device
bay using the assign subcommand.
Syntax
add profile <ProfileName> [-NoDefaultEnetConn]
[-NoDefaultFcConn] [-NoDefaultFcoeConn] [Nag=<nagName>]
[SNType=<Factory-Default|User-Defined>]
[SerialNumber=<serialnumber>] [UUID=<uuid>]
Parameter
ProfileName The unique name of the new server profile to create
Options
NoDefaultEnetConn Do not add default Ethernet network connections when creating the server profile.
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile.
NoDefaultFcoeConn Do not add default FCoE SAN connections when creating the server profile.
Properties
Nag (optional) The network access group for the profile. The default is the domain Default network
access group.
SNType (optional) The source of the serial number assignment to be used during the profile creation.
If not specified, the serial number is assigned according to the Virtual Connect
default domain settings. Valid values include "Factory-Default" and "User-Defined".
SerialNumber
(required if the
SNType is
User-Defined)
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay that contains a server, the server inherits the
virtual serial number. The user-defined serial number must start with the pattern
VCX01.
UUID (optional) A unique 128-bit identifier for the virtual server ID. The format is
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, where x is any alphanumeric character. If
no UUID is specified, one is auto-generated. The UUID can be specified only if the
SNType is "User-Defined".
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections and
Virtual Connect default serial numbers
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultFcoeConn
Creates a new profile without adding default FCoE connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn -NoDefaultFcoeConn
Creates a new profile without adding default Ethernet, FC, and FCoE connections
->add profile MyNewProfile2 Nag=DatabaseNetGroup
Creates a new profile and associates it with the DatabaseNetGroup network