HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 25)

Command line 25
Item Description
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user confirmation
(primarily used in automated scripting scenarios)
Item Description
set domain Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [MacType=<VC-Defined|Factory-Default|
User-Defined>] [MacPool=<1-64>] [MacStart=<MAC address>]
[MacEnd=<MAC address>] [WwnType=<VC-Defined |
Factory-Default | User-Defined>] [WwnPool=<1-64>]
[WwnStart=<WWN Address>] [WwnEnd=<WWN Address>]
[SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is 31 characters.
DomainIP (optional) Enables or disables the Virtual Connect domain IP address. If enabled, a valid IP
address and subnet mask must be configured. If disabled, DHCP is used to obtain
a valid IP address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the Virtual Connect Manager. Use caution
when changing these settings. Valid values include "Enabled" and "Disabled".
IpAddress (Required
if DomainIP is
enabled)
A valid IP address to use for the domain IP address configuration. The IP address
must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9, for
example, 192.168.0.10.
SubnetMask (Required
if IP address
specified)
A valid subnet mask for the domain IP address configuration. The subnet mask must
be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9, for
example, 255.255.255.0.
Gateway (Required if
IP address
specified)
A valid gateway address for the domain IP address configuration. The gateway
address must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and
9, for example, 192.168.0.1.
MacType (optional) The type of MAC address source to use for assignment. Valid values include
"VC-Defined", "Factory-Default", and "User-Defined".
MacPool (optional) The pre-defined MAC pool to use for address assignment. Valid values include
integers from 1 to 64. This property is valid only if the MacType is set to
"VC-Defined". If not specified, the default pool ID is 1.
MacStart (Required
if MacType is
User-Defined)
The starting MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
MacEnd (Required if
MacType is
User-Defined)
The ending MAC address in a custom user-defined range. This property is valid
only if the MacType is set to "User-Defined".
WwnType(optional) The type of WWN address source to use for assignment. Valid values include
"VC-Defined", "User-Defined", and "Factory-Default".
WwnPool(optional) The pre-defined WWN pool to use for address assignment. Valid values include
integers from 1 to 64. This property is valid only if the WwnType is set to
"VC-Defined". If not specified, the default pool ID is 1.