HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 84)

Command line 84
Item Description
->add server-port-map-range MyProfile:2
UplinkSet=MyUplinkSet2 VLanIds=1-20 MatchUplinkSet=true
Adds multiple networks to a server-port-map and locks VLANs to an uplink set
Item Description
remove server-port-
map-range
Remove one or more server port network mappings.
Syntax
remove server-port-map-range <ConnectionId> VLANIds=<VLAN ID
Range List>
Parameters
ConnectionId
(required)
The ID of an existing Ethernet connection associated with a profile and a server
port. The format of the Connection ID is <ProfileName:PortNumber>.
VLANIDs (required) The list of VLAN IDs to be removed from the mapping. The format is a
comma-separated list of VLAN ID ranges, where a range is either a single VLAN ID
or a hyphen-separated pair of VLAN IDs that identify a range of VLAN IDs. Valid
VLAN ID values include 1 to 4094.
Example
->remove server-port-map-range MyProfile:1
VLanIds=151-170,215
Removes multiple server port network mappings
snmp
View and modify the SNMP configuration for VC-Enet and VC-FC modules, and add, modify, and remove
SNMP trap configurations related to trap destinations.
Supported actions: set, show, help
Item Description
set snmp Modify the VC SNMP configuration.
Syntax
set snmp <Type> [ReadCommunity=<ReadCommunityString>]
[SystemContact=<SystemContact>] [Enabled=<true|false>]
[SmisEnabled=<true|false>]
Parameter
Type (required) Indicates which SNMP configuration to modify. Valid values include "Enet" and
"FC".
Properties
ReadCommunity
(optional)
Read-Only Community String for the SNMP configuration. The default value is
"public". If the type is "Enet", the maximum length of the read community string is
39 characters. If the type is FC, the maximum length is 12 characters.
SystemContact
(optional)
SNMP system contact information.
Enabled (optional) Enables or disables the SNMP agent. The default value is "true". Valid values
include "true" or "false".
SmisEnabled
(optional)
Enables or disables SMIS. This property is valid only for VC-FC modules. The default
value is "false". Valid values include "true" or "false".
Examples