HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 71)

Command line 71
Item Description
access group
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
Creates a new profile and specifies a custom virtual serial number
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
UUID=15713c60-fcf2-11dc-a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile Assign a server profile to a device bay.
Syntax
assign profile <ProfileName> <DeviceBay> [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay (required) The device bay to assign the profile to, in the format
<EnclosureID>:<DeviceBayNumber>. If EnclosureID is not specified, it
defaults to the local enclosure. To assign a profile to a multi-blade server,
<DeviceBay> must be the monarch bay.
Option
PowerOn Powers on the server after the profile is assigned
Examples
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure
Item Description
copy profile Copy an existing profile configuration to another profile. The copied profile
(destination profile) will be left unassigned.
Syntax
copy profile <src_profile_name> <dest_profile_name>
Parameter
src_profile_name
(required)
The name of the profile from which the configuration is being copied
dest_profile_name
(required)
The name of the profile to which the configuration is being copied
Example
->copy profile_server1 profile_server_new
Copies the configuration from profile_server1 to profile_server_new
Item Description
load profile Load a saved EFI data object from a remote ftp server on the network. The EFI data
object is loaded into an existing server profile. The server profile must not be
assigned to a server bay and it must not have an EFI data object present.
Syntax
load profile <ProfileName>
address=<ftp://user:password@ipaddress/filename>
-or-
load profile <ProfileName>
address=<ftp://user:password@ipaddress> filename=<name>