HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 9)

Introduction 9
Command Changes Virtual Connect
3.15 Virtual Connect 3.30
show network The output for this
command was
modified.
Configured values
for the
ConnectionMode,
VLanTunnel,
NativeVLAN,
UplinkSet, and
VLanID appeared
for all networks.
Configured values for
ConnectionMode and
VLanTunnel appear for
UNSHARED networks
only.
Configured values for
NativeVLAN,
UplinkSet, and VLanID
appear for SHARED
networks only.
add network-access-group
help network-access-group
remove network-access-group
set network-access-group
show network-access-group
The new object
"network-access-group
" is supported in VC
3.30, enabling you to
manage network
access groups in the
domain.
Not supported All of these commands
are supported.
add network-range
help network-range
remove network-range
set network-range
The new object
"network-range" is
supported in VC 3.30,
enabling you to
manage ranges of
networks.
Not supported All of these commands
are supported.
add profile
set profile
The "Nag" property
was added to these
commands, enabling
you to add and modify
the network access
group associated to a
server profile.
Not supported add profile
<ProfileName>
[Nag=<nagName>]
set profile
<ProfileName>
[Nag=<nagName>]
copy profile The "copy"
subcommand was
added to this
command, enabling
you to copy an existing
server profile
configuration to
another profile.
Not supported copy profile
<src_profile
_name> <dest_
profile_name>
help radius
show radius
set radius
The new object
"radius" is supported
in VC 3.30, enabling
you to manage
RADIUS
authentication.
Not supported All of these commands
are supported.
add radius-group
help radius-group
remove radius-group
show radius-group
set radius-group
The new object
"radius-group" is
supported in VC 3.30,
enabling you to
manage RADIUS
groups.
Not supported All of these commands
are supported.