HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 78)

Command line 78
Item Description
loss on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (60 seconds by default), the server is forced to power off.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete (per
server). The default timeout is 60 seconds.
Examples
->poweroff server enc0:2
Powers off the server in device bay 2 of the local enclosure
->poweroff server enc0:2 -Force
Forces the server in device bay 2 of the local enclosure to power off
->poweroff server *
Powers off all servers in the domain
->poweroff server enc0:*
Powers off all servers in the local enclosure
->poweroff server enc0:2 -ForceOnTimeout
Attempts a graceful shutdown, but forces a shutdown at the end of the timeout
period
->poweroff server * -Timeout=180
Powers off all servers and specifies a custom timeout of 3 minutes
->poweroff server enc0:1
Powers off the multi-blade server in bays 1-4 of the local enclosure
Item Description
poweron server Power on one or more physical servers.
Syntax
poweron server <ServerID|*> [-Timeout=<timeout>]
Parameter
ServerID (required) The ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the EnclosureID is not specified, the local
enclosure is used by default. Use "*" to power on all servers in the domain. For a
multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Option
Timeout The timeout period (in seconds) to wait for the operation to complete. The default
timeout is 60 seconds.
Examples
->poweron server 2
Powers on the server in bay 2 of the local enclosure
->poweron server *
Powers on all servers in the domain
->poweron server enc0:*
Powers on all servers in the local enclosure
->poweron server * -Timeout=120
Powers on all servers in the domain and specifies a custom timeout of 2 minutes
->poweron server enc0:1
Powers on the multi-blade server in bays 1-4 of the local enclosure
Item Description
reboot server Reboot one or more physical servers.
Syntax
reboot server <ServerID|*> [-Force] [-ForceOnTimeout]
[-timeout=<timeout>