HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 65)

Command line 65
Item Description
Name (optional) The name of an existing network access group in the VC domain. Use "*" to display a
detailed view of all the network access groups. If not specified, a summary view of all
network access groups appears.
Examples
->show network-access-group
Displays a summary of all network access groups
->show network-access-group *
Displays detailed information for all network access groups
->show network-access-group DatabaseNetGroup
Displays detailed information for a specific network access group
network-range
Manage multiple networks in a shared uplink set.
Supported actions: add, help, remove, set
Item Description
add network-range Create multiple networks in a shared uplink set.
Syntax
add network-range [-quiet] UplinkSet=<UplinkSetName>
[NamePrefix=<prefix>] [NameSuffix=<suffix>]
VLANIds=<VLAN range list> [State=<enabled|disabled>]
[PrefSpeedType=<auto|custom>] [PrefSpeed=<100Mb-10Gb
in 100Mb steps>] [MaxSpeedType=<unrestricted|custom>]
[MaxSpeed=<100Mb-10Gb in 100Mb steps>]
[Nags=<Name1>[<Name2>,...]
[SmartLink=<enabled|disabled>]
[Labels=<Label1>[<Label2>,...]
[Color=<red|green|blue|orange|purple>]
Options
quiet This option suppresses user confirmation prompts. This option is useful
when scripting operations.
Properties
UplinkSet (required) The name of an existing shared uplink port set to use with the new
networks
VLANIds (required) A comma separated list of VLAN ranges. The VLAN IDs must not overlap
or already be used in the uplink port set. The VLAN IDS are combined with
the NamePrefix and NameSuffix properties (if any) to create the name for
the networks.
NamePrefix (optional) The string to prefix before the VLAN ID when naming the new networks. If
omitted, no string is used to prefix the VLAN ID.
NameSuffix (optional) The string to add after the VLAN ID when naming the new networks. If
omitted, no string is added after the VLAN ID.
State (optional) Enables or disables the networks. Valid values are "Enabled" and
"Disabled". The default value is "Enabled".
PrefSpeedType (optional) The default connection speed for any Ethernet connection attached to
these networks. Valid values include "Auto" and "Custom". "Custom"
enables you to configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is "Custom")
The connection speed for any Ethernet connection attached to these
networks. Valid values range from 100Mb to 10Gb in 100Mb
increments.