HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem User Manual
HP Computer Accessories
Advertising
HP Virtual Connect Manager Command Line
Interface for c-Class BladeSystem Version 3.30
User Guide
Abstract
This document contains user information for the HP Virtual Connect Manager version 3.30 CLI. This document is for the person who installs,
administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in
recognizing hazards in products with hazardous energy levels.
Part Number: 660360-001
August 2011
Edition: 1
Advertising
This manual is related to the following products:
1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem, Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem, Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem, Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem, 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem, Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem, Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem
Table of contents
Document Outline
- HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide
- Abstract
- Notice
- Contents
- Introduction
- Command line
- Subcommands
- Managed elements
- all
- version
- banner
- config
- configbackup
- devicebay
- domain
- enclosure
- enet-connection
- enet-vlan
- external-manager
- fabric
- fc-connection
- fcoe-connection
- firmware
- igmp
- igmp-group
- interconnect
- interconnect-mac-table
- iscsi-boot-param
- iscsi-connection
- ldap
- ldap-certificate
- ldap-group
- link-dist-interval
- lldp
- log-target
- loop-protect
- mac-cache
- nag-network
- network
- network-access-group
- network-range
- port-monitor
- profile
- radius
- radius-group
- role
- server
- serverid
- server-port
- server-port-map
- server-port-map-range
- snmp
- snmp-trap
- ssh
- ssl
- ssl-certificate
- ssl-csr
- stackinglink
- statistics
- statistics-throughput
- status
- storage-management
- supportinfo
- systemlog
- tacacs
- uplinkport
- uplinkset
- user
- user-security
- vcm
- User privileges
- Help subsystem
- Output format
- Statistics descriptions
- Configuring the Virtual Connect domain using the CLI
- Basic configuration
- Logging in to the CLI
- Domain setup
- Network setup
- Configuring MAC address ranges
- Creating a network access group
- Creating an Ethernet network
- Adding Ethernet networks to a network access group
- Creating an Ethernet network that uses network access groups
- Adding uplink ports to an Ethernet network
- Creating a shared uplink set
- Adding uplink ports to a shared uplink set
- Creating a network that uses a shared uplink set
- Creating multiple networks that use a shared uplink set
- Server VLAN Tagging Support
- Fibre Channel setup
- Serial number settings
- Server profile setup
- Creating server profiles
- Adding Ethernet network connections to a profile
- Adding iSCSI connections to a profile
- Adding FC fabric connections to a server profile
- Adding FCoE connections to a profile
- Adding a network access group to a profile
- Assigning a server profile to a device bay
- Configuring IGMP settings
- Configuring MAC cache failover settings
- Configuring network loop protection settings
- Server blade power on and power off guidelines
- General requirements for adding FC or FCoE connections
- Logging out of the CLI
- Common management operations
- Port status conditions
- Resetting the Virtual Connect Manager
- Basic configuration
- Technical support
- Acronyms and abbreviations
- Index