HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 32)

Command line 32
Item Description
(optional) 'Legacy' mode allows up to 320 VLANs per module and 28 VLANs per server
connection. All VC-Enet modules are supported. This is the default setting.
'Expanded' mode allows up to 1000 VLANs per domain and 162 VLANs per
physical server port. 1/10Gb Ethernet modules are NOT supported.
UplinkResources
(optional)
The number of VLAN translations allocated to the uplinks. This attribute can be set
only when VlanCapacity is "Extended". Valid values range from 240 to 4080 in
increments of 16 (enclosure) or 24 (rack). The default value is 640.
Examples
->set enet-vlan SharedServerVLanId=true
Enables SharedServerVLanId
->set enet-vlan PrefSpeedType=Custom PrefSpeed=500
MaxSpeedType=Custom MaxSpeed=2500
Sets the preferred connection speed for all connections using multiple networks to
500Mb, and the maximum connection speed to 2.5Gb
->set enet-vlan VlanCapacity=Expanded
Sets the VLAN capacity mode to Expanded to allow for larger network
configurations
Item Description
show enet-vlan Display general Ethernet VLAN configuration settings.
Syntax
show enet-vlan
Example
->show enet-vlan
Displays Ethernet VLAN configuration settings
external-manager
Manage external manager settings and information.
Supported actions: help, remove, set, show
Item Description
remove
external-manager
Remove an existing external manager (VCEM) and regain local management
profile control of the domain.
When releasing the profile control, you must specify values for each MacType,
WwnType, and ServerIdType.
Syntax
remove external-manager [-quiet] [UserName=<username>]
[MacType=<Factory-Default| User-Defined>] [MacStart=<MAC
address>] [MacEnd=<MAC address>]
[WwnType=<Factory-Default|User-Defined>] [WwnStart=<WWN
address>] [WwnEnd=<WWN address>]
[ServerIdType=<Factory-Default| User-Defined>]
[ServerIdStart=<ServerId address>] [ServerIdEnd=<ServerId
address>]
Option
quiet This option suppresses user confirmation prompts and is useful when scripting
operations.
Properties
UserName (optional) A valid external manager user name. The user name can be identified using the
show external-manager command.